WindSun Science & Technology Co.,Ltd.
Mission Master core technology and continuously promote power electronic equipment to integrate all industries. Vision Save energy, serve society, strive more than 100 years.
Add to Cart
Feature
Different motor auto-tune methods
The efficient and fast motor parameter identification algorithm supports a variety of auto-tune methods, and the dynamic and static tuning is accurate and consistent, without manual adjustment, so as to give full play to the driving performance.
Reliable braking performance
Integrating DC, magnetic flux, short circuit and other braking modes, it can realize safe and fast stopping of large inertia load.
Flying start
The software automatically searches the speed and direction of the motor, which can realize the smooth and shock free starting of the motor at any speed.
Stable low frequency high
torque performance Under the closed-loop vector mode, the low-frequency torque is large and the torque ripple is small, which can realize the stable load operation of very low speed 0.01Hz, and the torque and speed modes can be switched smoothly online
Excellent motor control algorithm
● The new magnetic field oriented control algorithm has superior low-frequency and heavy load performance and improves the torque control accuracy;
● The new speed observer reduces the dependence of motor parameters and improves the stability of speed control;
Reliable torque limit
"Excavator" features, safely and effectively protect the mechanical equipment in case of sudden load change
Table. Product rated electrical parameters
| Model no. | Output power (kW) | Input current(A) | Output current(A) | Carrier frequency(kHz) | Remark |
| FD300-0R7G/1R5P-4 | 0.75 | 3.4 | 2.5 | 1～15(8/4) | |
| FD300-1R5G/2R2P-4 | 1.5 | 5.0 | 4.2 | 1～15(8/4) | |
| FD300-2R2G/003P-4 | 2.2 | 5.8 | 5.5 | 1～15(8/4) | |
| FD300-004G/5R5P-4 | 4 | 13.5 | 9.5 | 1～15(8/4) | |
| FD300-5R5G/7R5P-4 | 5.5 | 17 | 14 | 1～15(8/4) | |
| FD300-7R5G/011P-4 | 7.5 | 25 | 18.5 | 1～15(8/4) | |
| FD300-011G/015P-4 | 11 | 32 | 25 | 1～15(8/4) | |
| FD300-015G/018P-4 | 15 | 40 | 32 | 1～15(4/2) | |
| FD300-018G/022P-4 | 18 | 47 | 38 | 1～15(4/2) | |
| FD300-022G/030P-4 | 22 | 51 | 45 | 1～15(4/2) | |
| FD300-030G/037P-4 | 30 | 57 | 60 | 1～15(4/2) | Optional DC reactor |
| FD300-037G/045P-4 | 37 | 69 | 75 | 1～15(4/2) | |
| FD300-045G/055P-4 | 45 | 89 | 91 | 1～15(4/2) | |
| FD300-055G/075P-4 | 55 | 110 | 115 | 1～15(4/2) | |
| FD300-075G/090P-4 | 075 | 140 | 150 | 1～15(2/1.5) | |
| FD300-090G/110P-4 | 90 | 165 | 180 | 1～15(2/1.5) | |
| FD300-110G/132P-4 | 110 | 200 | 215 | 1～15(2/1.5) | |
| FD300-132G/160P-4 | 132 | 250 | 260 | 1～15(2/1.5) | |
| FD300-160G/185P-4 | 160 | 290 | 315 | 1～15(2/1.5) | |
| FD300-185G/200P-4 | 185 | 320 | 340 | 1～15(2/1.5) | Optional DC reactor |
| FD300-200G/220P-4 | 200 | 365 | 380 | 1～15(2/1.5) | |
| FD300-220G/250P-4 | 220 | 410 | 425 | 1～15(2/1.5) | |
| FD300-250G/280P-4 | 250 | 445 | 470 | 1～15(2/1.5) | |
| FD300-280G/315P-4 | 280 | 500 | 530 | 1～15(2/1.5) | |
| FD300-315G/355P-4 | 315 | 580 | 600 | 1～15(2/1.5) | |
| FD300-355G/400P-4 | 355 | 620 | 650 | 1～15(2/1.5) | Standard DC reactor |
| FD300-400G/450P-4 | 400 | 690 | 725 | 1～15(2/1.5) | |
| FD300-450G/500P-4 | 450 | 785 | 820 | 1～15(2/1.5) | |
| FD300-500G/630P-4 | 500 | 825 | 860 | 1～15(2/1.5) | |
| FD300-630G/710P-4 | 630 | 1050 | 1100 | 1～15(2/1.5) |
Note:
1.The max power rating of FD300 400 voltage level is 630kW；
2.The input current is the actual test result when the input voltage is 380V, and for 30kW and above ratings, the input current is measured with DC reactor configured.The input current
3.The output current refers to ABB and is defined as 380V rated output current.
4.Under the allowable input voltage range, the output current shall not exceed its limit output current; The output power shall not exceed its rated output power.
5. Inverters 37kW and below built-in DBU standard.
6. Inverters 45~110kW standard without DBU(can be built-in DBU optionally with –B model
7.The above dimensions are for reference only. Please refer to the project drawings and physical objects for details.
8. Due to product upgrading, the contents of this manual will be updated regularly. If you need to buy our products, please refer to the latest product manual.