WindSun Science & Technology Co.,Ltd.
Mission Master core technology and continuously promote power electronic equipment to integrate all industries. Vision Save energy, serve society, strive more than 100 years.
Add to Cart
| Product number | JD-BP37/38-T | |
| Applicable motor power (KW) | 200kW-3250kW (4-pole motor is the standard, 6-12-pole motor is selected according to current) | |
| Output | Rated power (KW) | The power working under the rated voltage of the motor: |
| 200kW-8000kW | ||
| Rated current (A) | The current working at the rated voltage of the motor | |
| Overload capacity | 105% continuous 130% allow 1 minute | |
| 130% allow 1 minute | ||
| 150% allows 3 seconds | ||
| Output voltage (KV) | Three-phase: 6kV, 10kV (Customisable) | |
| Waveform | Multiplexed SPWM sine wave | |
| Enter | Phase, Frequency, Voltage | Three-phase, 50Hz, 6kV (10kV) |
| Volatility is allowed | Voltage: -10%~+10%, Frequency: ±5%, -10%~-35% derating for continuous operation | |
| Basic performance | Start frequency | 0-10Hz can be set |
| Precision | Analog setting: 0.3% (25±10°C) or less of the maximum frequency setting value Digital setting: below 0.02% of the maximum frequency setting value (-10~+50℃) | |
| Resolution | Analog setting: 1/2000 of the maximum frequency setting value Digital setting: 0.01Hz (below 99.99Hz), 0.1Hz (above 100Hz) | |
| Efficiency | >95% at rated output | |
| Power factor | >0.95 | |
| Control | Acceleration and deceleration time | 0.1~6000.0S, the acceleration and deceleration time can be set separately |
| Voltage/Frequency Characteristics | Determined by the selected V/F curve | |
| PID | Manually set PID parameters | |
| Auxiliary function | V/F curve, low frequency compensation, rated current, current protection limit setting | |
| High voltage isolation | Electromagnetic coupling, multi-channel fiber optic transmission | |
| Control power input | AC 220V 2kVA | |
| Run | Run operation | Local control (touch screen) operation, remote external control operation, upper computer operation (optional) |
| Frequency given | Touch screen digital setting, multi-speed setting, external control analog signal (DC4~20mA) setting | |
| Running status output | Relay status output, inverter fault, alarm, running/stop and other status indication | |
| Touch screen | Input/output voltage, input/output current, set value, fault status of each unit, running status, transformer status, bus voltage of each unit, etc. | |
| Protective function | Motor overcurrent, whole machine overvoltage, whole machine undervoltage, unit overcurrent, unit overvoltage, unit overheating, unit input phase loss, optical fiber communication failure, etc. | |
| Surroundings | Place of use | Indoor, no corrosive or conductive gas, dust, direct sunlight, below 1000 meters above sea level |
| Ambient temperature/humidity | -10℃~+40℃ / 20~90%RH without condensation | |
| Vibration | 5m/s² (below 0.6g) | |
| Storage temperature | --20~+65℃ (suitable for short-term storage such as transportation) | |
| Cooling method and enclosure protection level | Forced air cooling/IP31, water cooling/IP40 | |
Note:
1. The above dimensions are for reference only, please refer to the actual
2. Due to product upgrade, the page content will be updated regularly, if you need to buy our products, please refer to the latest manua